6K V2
8-Channel 2.4GHz Computer Radio System

SEARCH:

Updated Version 2 offers 8 channels of control!

To get the most radio for your money, check out the new 6K — an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 compatibility and 30 model memory. With Version 2 updates, it's now a better value than ever. The NEW 6K is an 8-channel system with additional telemetry functions, expanded multicopter flight modes and much more.

New in the 6K Version 2:

Two additional channels

  • Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
  • Allow for expansions or adding accessories
  • Can be assigned to any of the four switches or VR dial
  • Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer

Expanded Flight Modes (Fly Mod) in multicopter programming

  • Priority — toggle through five different values assigned to flight modes on an assigned channel
  • Matrix — up to nine combinations using two, 3-position switches for controlling gimbals

Vibration alerts with timer functions and Throttle Integrate

SBS-01C current sensor and SBS-01V voltage sensor compatible

6KA

  6KH

2.4GHz S-FHSS 2.4GHz T-FHSS Telemetry System S.Bus logo S.Bus2 logo

R3006SB The included R3006SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of telemetry sensors.
Version 2 6K 8-Channel 2.4GHz Computer Radio System FUTK6100

Owners of 6-channel 6K systems — download the free Version 2 firmware update





The versatile 6K meets the control needs of a wide range of R/C pilots!
Program navigation is easy and intuitive with the jog dial, +/- pads and end pad.

The 6K is a full-range system. Its antenna is inside the transmitter case for safety and convenient handling.
This variable rate dial can be programmed for a variety of functions. A speaker provides audible alerts and cues for navigating the programming menus.

switches

Four assignable switches (three 3-position and one 2-position) offer maximum flexibility.

Priority flight conditions screenshots (3)

6K Version 2 multicopter programming has been expanded with five Priority and nine Matrix flight conditions.

Matrix flight conditions screenshots (3)

The nine Matrix flight conditions can be used to set up a tilt camera by assigning nine settings to two 3-position switches.

SBS-01C [FUTM0860] and SBS-01V [FUTM0855]

Using an SBS-01V External Voltage Telemetry Sensor and SBS-01C Current Telemetry Sensor, the 6K collects real time telemetry data for motor current, battery voltage and capacity. (not included)
 

System features

  • Airplane, Helicopter, Glider and Multicopter programming
  • S-FHSS/T-FHSS selectable
  • Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage
  • Built-in antenna (Full Range)
  • S.Bus/S.Bus2 servo setting functions programmable through the transmitter
  • Preset vibration alarms
  • 30 model memory
  • 8-character model/user naming
  • Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors
  • Digital trims with variable step settings
  • Adjustable stick length and tension
  • Changeable switch/VR position and AUX channel function
  • Throttle position warning
  • Backlit 128x64 DOT LCD screen with adjustable display contrast
  • Software updateable through the CIU-2 or CIU-3 interface units
  • Screen Lock
  • Earphone/S.Bus/Trainer jacks
  • Assignable switches (three 3-position, one 2-position)
  • Range Check
  • Program navigation bay with jog dial, +/- pads and end pad
  • Data reset
  • Model copy
  • Selectable model type
  • Fail Safe
  • End Points
  • Trim/Trim Resets/Trim Steps
  • Sub Trim
  • Servo Reversing
  • Parameter functions
  • Servo monitor/Test
  • Wireless model data transfer (to other T6K transmitters)
  • Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert
  • Trainer system
  • Power Saver

Airplane Functions

  • Wing Type (5-wing, 2-tail)
  • Throttle Cut
  • Dual Rate/Expo
  • Throttle Curve
  • Idle down
  • Gyro
  • Aileron differential
  • V-Tail
  • Camber
  • Air Brake
  • Elevator-to-Flap mixing
  • Flap-to-Elevator mixing
  • Elevon mixing

Glider Functions

  • Wing Type (5-Wing, 2-Tail)
  • Condition select
  • Dual Rate/Expo
  • Motor switch
  • Gyro
  • Aileron Differential
  • V-tail
  • Butterfly mixing
  • Trim mixing
  • Elevator-to-Camber mixing
  • Camber mixing
  • Aileron-to-Camber mixing

Helicopter Functions

  • Swash type (6)
  • Condition Select
  • Throttle Cut
  • Dual Rate/Expo
  • Trim Offset
  • Delay
  • Gyro mixing
  • Swash AFR
  • Swash mixing
  • Throttle Curve (5-point)
  • Pitch Curve (5-point)
  • Pitch-to-Rudder mixing
  • Throttle Hold
  • Hovering throttle
  • Hovering pitch

Multicopter Functions

  • Flight Mode
  • Center alarm
  • Dual Rate/Expo
  • Throttle Curve
  • Throttle Delay
  • Gyro

Six Languages

  • English
  • German
  • French
  • Spanish
  • Italian
  • Dutch

 Click stock numbers for Tech Notes
Stock # System Band Receiver Servo(s)
FUTK6100 6KA T-FHSS 2.4GHz R3006SB
FUTK6110 6KH T-FHSS 2.4GHz R3006SB

Requirements:

  • 4 "AA" cells
  • Servos

Transmitter Specifications:

Type
2-stick, T-FHSS/S-FHSS selectable
Channels
8 (channels 7/8 are used through the receiver S.Bus/S.Bus2 port)
Power Supply
4 "AA" cells; optional 6V NiMH or 6.6V LiFe batteries

Receiver Specifications:

R3006SB 2.4GHz T-FHSS S.Bus
Type
Full-range flight receiver
Modes
S-FHSS or T-FHSS
Features
bi-directional communication with a T-FHSS transmitter to utilize an array of telemetry sensors, S.Bus and S.Bus2 ports, along with 6 standard PWM ports; Dual Antenna Diversity, Easy Link, High Voltage, Battery Fail Safe, Channel Mode
Voltage Input
4.8V-7.4V
Dimensions
1.7 x 0.98 x 0.35 in (43 x 25 x 8.8 mm)
Weight
0.3 oz (8.5 g)
Stock #
FUTL7683


6K V2 Manual




Optional Accessories

SBS-01RM Magnetic RPM Sensor
FUTM0852 SBS-01RM Magnetic RPM Sensor


SBS-01RO Optical RPM Sensor
FUTM0853 SBS-01RO Optical RPM Sensor


Temperature Telemetry Sensor
FUTM0854 Temperature Telemetry Sensor


SBS-01TE EP Temperature Sensor
FUTM0856 SBS-01TE EP Temperature Sensor


SBS-01RB Brushless Motor RPM Sensor
FUTM0857 SBS-01RB Brushless Motor RPM Sensor


Single Transmitter Case
FUTP1100 Single Transmitter Case


SBS-01C CURRENT SENSOR
FUTM0860 SBS-01C Current Sensor


SBS-01V EXTERNAL VOLTAGE SENSR
FUTM0855 SBS-01V External Voltage Sensor


FUTM1482 HT5F1800B TX NIMH 6V
FUTM1482 HT5F1800B TX NIMH 6V


FUTM1490   FT2F1700B LIFE 6.6V 1700
FUTM1490 FT2F1700B LIFE 6.6V 1700


FT2F2100B LIFE 6.6V 2100
FT2F2100B LIFE 6.6V 2100


 


Manuals  |  Team Futaba  |  Futaba Store  |  Contact Us  |  Team Tips  |  Multimedia
Software Updates  |  Downloads  |  News  |  Promotions  |  Find a Dealer  |  Air Events  |  Surface Events


© 1997-2017 Hobbico, Inc. All rights reserved. Terms of Use
E-Bulletin
  • Follow Hobbico on YouTube
  • Follow Futaba on Facebook
  • Follow Hobbico on Instagram
  • Follow Futaba on Twitter
  • Follow Hobbico on Google+