|
|
Radio System FAQ
Can I create a Dual Rate for my Elevator/Aileron/Rudder and have it activated by a Slider?
First you will need an empty channel for this (AUX8?). Then you will go into the FUNC menu and assign this empty channel to the Left/Right Slider. Next, you will go to your Pmix menu and make a mix from the channel you are wanting to control Elevator/ Aileron/Rudder, making this both the Master and the Slave. At the bottom of your screen you will make this a CTL type mix, press next, and you will assign the Control channel (top left-hand corner), here you will make this the empty channel (AUX 8?) that you used from your first step. After this you will set your percentages for the action of the slider, whether top being 100%, center 50%, and down 20%.....etc, this will be up to you.
Back to main FAQ/Contact Info page
|
|
