|
|
Radio System FAQ
I am setting up flaperons on my 9Z. The flaperon function works great for the ailerons, but I can't seem to operate the flaps. What am I doing wrong?
Nothing. The stock setup of the flaperons is so that the ailerons are operated normally, and then if you want to operate the flaps as flaps you will use airbrake or a mix to activate the flaps. If you want to be able to TRIM your flaps, go back into flaperon. Press NEXT and you're on the offset and flap trim menu. Set the desired % you want the trim available. Now you can trim the flaps that far up or down on the slider or whatever control you assign channel 6 (flaps) to in the function menu.
Back to main FAQ/Contact Info page
|
|
