|
I want to create a mix which is only active if my throttle is above a certain point. For example, I only want my smoke to come on if my throttle is above 1/2 to avoid killing the engine. How can I do this?
Select a blank pmix, and mix channel A to channel B (in our case mix throttle to smoke). Set your desired percents, and trim/offset if desired, then go to the switch assignment screen and set it to 'stk3'. This means throttle stick. Then set the position — with the throttle stick in the desired position and press the set keys (+ and - together). Now, one last step—if you want the mix active ABOVE this stick position, press +; BELOW this stick position, press -.
Keystrokes:
| ___ | Press the 2 advanced menu keys |
| ___ | Arrow up until you hit an unused pmix |
| ___ | Press + to make it active |
| ___ | Arrow over |
| ___ | Set the master channel as throttle |
| ___ | Arrow over |
| ___ | Set the slave channel as smoke (ch 7) |
| ___ | Arrow over |
| ___ | Set the desired % |
| ___ | Arrow over |
| ___ | Link off |
| ___ | Arrow over |
| ___ | Press + until get to STK 3 |
| ___ | Arrow over |
| ___ | Set the stick position |
| ___ | Press the +/- keys to set position |
| ___ | Press + or - to set active above or below this point |
That's it! Works great. Enjoy your 8U!
Back to main FAQ/Contact Info page
|
