|
Please explain the MODE options in the Gyro Menu.
When you go into the GYRO menu, use the Down cursor key to get to the second page, here you will see, MODE: GY setting is for heading hold/AVCS gyros - the GY series gyros from Futaba. STD mode has 0 to +100 also allowing for 1/2% increments. The GY programming acknowledges that left of center to 0 is 100 to 0 AVCS/HH (You will see the A beside the word Up and Down, and right of center is 0 to 100 normal mode (you will see the N beside the word Up and Down).
Back to main FAQ/Contact Info page
|
