|
I want to be able to drop a set amount of flaps or elevators or both for certain flight conditions (such as launching a glider). Can my 6X do this?
Absolutely! This is exactly what the air brake function is designed for.
Go to ABRK.
Cursor over until INH is blinking.
Press - to go from INH to off.
Move the air brake switch. Now the air brake mixing is active and turned on.
Notice it has a preset amount of channel 2 and channel 6 in it.
Is it not the amount you want?
Cursor over 1 time and you're at the % for the channel 2(elevator) portion of air brake. Adjust as desired with the + or - keys.
Cursor again and you're at the % setting for the channel 6 (flap) portion of air brake. Adjust as desired with the + or - keys.
Note: you can turn either of these down to 0 if you want no reaction from channel 6 or channel 2.
Back to main FAQ/Contact Info page
|
