|
On the 9 ZAWS, in addition to the digital throttle trim, I could program a slider to have more flexibility on the throttle. After take off, I just pushed the slider to have a slightly higher idle. When it comes time to land, I lowered the slider to lower the engine idle. Can you help me program this operation into my new radio?
With the flexibility of this radio, there are probably a few ways to go about this; as with a Pmix.
Program a Pmix with master as throttle and the slave as throttle, leaving the percentages both as +100%, and as you didn't want to specifically do anything with this mix (other than use it for the tuning purposes) leave the switch selection as Null.
Down in the lower left hand corner set the Fine Tuning to LS (left slider). Set the amount of tuning to -40%, but you will need to adjust this to your own needs. You will also need to adjust the curve of your tune also with the box between the switch selection box and the rate box, I have mine set to Linear. But again, this will depend on your needs.
Back to main FAQ/Contact Info page
|
