|
|
9CA/CH Computer Systems
The 9C Series: Futaba sophistication at its finest!
 The photograph and callouts here show the factory-set default assignments for airplanes and helicopters on a 9C Mode 2 radio. But with the programming built in, virtually any function can be reassigned to a new location. (NOTE: 9CA airplane system shown. The locations of Switches E and H are reversed on 9CH systems.
A. Edit Keys
(Top = Display Menus Bottom = Close Features) |
| B. Power Switch |
| C. Rudder Trim Level |
| D. Throttle Trim Lever |
| E. Rudder/Throttle Stick Rudder/Throttle & Collective (Heli) |
| F. Neckstrap Hook (neckstrap optional) |
| G. Assignable, Variable Rate Slider (VR-D) |
H. Switch E/Ch #5 - Landing Gear
Throttle Hold (Heli) |
| I. Switch F - Trainer System or Snap Roll Trainer System (Heli) |
|
| J. Switch A - Elevator Dual Rates |
| K. Switch B - Rudder Dual Rates |
| L. Knob A/Ch #6 - Flap Trim Control (if flaperon is active.) Hovering Pitch (Heli) |
| M. Knob B/Ch #8 |
| N. Dust Cap (remove for optional CAMPac use.) |
O. Knob C/Ch #7 - Spoiler
(Disabled when Aileron Differential is active.) Hovering Throttle (Heli) |
| P. Switch C - Elevator/Flap Mix and Airbrake. Governor (Heli) |
| Q. Switch H - Assignable 9 (Acro). Idle-up #3 or Gyro (Heli) |
|
| R. Switch G - Assignable (Acro). Idle-up #1 and #2 (Heli); |
| S. Switch D - Aileron Dual Rates |
| T. Assignable, Variable Rate Slider (VR-E) |
U. Elevator/Aileron Stick
Cyclic Pitch/Roll (Heli) |
| V. Elevator Trim Lever |
| W.Aileron Trim Lever |
| X. LCD Panel |
| Y. Rotary Dial (Rotate to Find; Push to Select) |
| Z. Edit Keys - (Cursor Up/Down and Left/Right) |
|
All switches feature a stronger, higher base that offers better protection against damage. Assignable slider switches offer “eyes-free” fingertip control. |
Easier reference is the rule with the 9C's larger LCD. The improved, 128 x 64 dot screen displays the 9C's improved graphics with greater clarity than ever before. |
All 9C systems include dual-conversion receivers for today's best in clean, clear, interference-free reception.
The 9CAF and 9CHF utilize the 8-channel R148DF FM, with a weight of 1.1 oz. and dimensions of 1" x 2.2" x 0.90". |
The R149DP 1024 PCM 9 channel receiver, standard in the 9CAP and 9CHP systems, weighs 1.2 oz and measures 2.16" x 1.27" x 0.82". |
|
|
