|
|
9CA/CH Computer Systems
The 9Cs' innovative programming system at your fingertips
Open the Program Menu
HOLD Down TOP LEFT KEY for 1 SECOND to OPEN Basic Menu. |
FIND. OPEN. SET. CLOSE.
It's that simple.
It takes just those four words to describe the process of programming the 9C system. And in just a few minutes, you can master all four steps with the 9Cs' exciting new Dial n' Key System.
The search ease of a computer mouse—push-button ease for selection, access, settings and closing—with the 9C Series, programming is faster and more user-friendly than with any other 8+ channel computer radio available today.
Rotate Dial to Find Program.
From the Program Menu simply rotate the Dial to choose the program you wish to edit. |
Press Dial to OPEN Program.
By pressing the dial you open the highlighted program allowing you to make required changes. |
Use Dial & Cursor Keys to SET Program.
The Cursor Keys allow you to scroll through setting options while the Dial allows you to dial-in the deseired values. |
Push End Button to Close Program.
Push BOTTOM LEFT BUTTON TO CLOSE the program and return to Program Menu. |
These helpful programming graphics appear before your eyes...
Confirms changes to dual or exponential rates on aileron, elevator and rudder as you make them. |
With the SERVO TEST feature on, the graph shows the travel of all 8 proportional servos as they cycle through their limits. With the SERVO TEST feature off, servo setups/mixes can be verified independently. |
Throttle curve offers a visual map of the relationships between throttle settings. Values for Normal, IDLE1, IDLE2 and IDLE3 are programmable. |
Like Throttle Curve, Pitch Curve displays four programmable values (plus zero) plotted on a graph. |
|
|
